Overview
BeamerPaint turns any smooth flat surface into a high-quality presentation wall suitable for projection. With BeamerPaint you have everything to create a matte, bright white and reflective surface that is ideal for video projection. Whether an office wall needs to be transformed into a presentation screen, or a living room needs to be converted into a home cinema, use BeamerPaint for an optimal and sharp projection. In any size, and even on curved walls. BeamerPaint can be used in combination with MagnetPaint for extra functionality. BeamerPaint consists of a water-based primer and a finish. The two layers optimise the surface to provide a hard but smooth layer, making projection sharp and rich in contrast.
- For professional use only
- Hard top layer perfect for projection of images
- Includes base and top layer
| Area | Interior |
| Recommended Use | Ideal for Walls, in offices, training rooms or homes |
| Base | Water-Based |
| Coverage | Base: Up to 8m² per litre Finish: Up to 16m² per litre |
| Drying Time | Base: 5 minutes Finish: 15 minutes |
| Re-Coat Time | 1 hour |
| Recommended Coats | 4 coats Base: 2 coats Finish: 2 coats |
| Application Method | Roller or Spray |
| VOC Levels | Low |
| Clean Up | Clean your equipment with water directly after use. |
Preparation
Application
We recommend always following the manufacturer's instructions found on the tin. It is recommended that a small test area is applied before treating the entire surface to ensure compatibility.
- BeamerPaint is a combination of two high quality water based indoor wall paints based on acrylic binders.
- BeamerPaint is applied in four layers; two coats of BeamerPaint base and two coats of BeamerPaint finish.
- BeamerPaint Base and Finish can both be applied with a velour paint roller for water-based paints. On larger surfaces, the undiluted paint can be applied using Wagner XVLP spray technology.
- Stir the Base Paint well, and start by applying two layers of Base with an interval time of 1 hour. Apply the paint in long overlapping lanes from top to bottom. Wait 1 hour before applying the Finish.
- Stir the Finish well, and apply two layers of finish with an interval time of 1 hour. The application technique is the same as for the Base.
- After applying the entire paint system, the surface should not be sanded, for it will destroy the visual effect.
- BeamerPaint is ready to use as soon as the last layer of Finish has dried.
- BeamerPaint creates a matte, slightly reflective and pure white surface. BeamerPaint is not affected by exterior light due to its slightly reflective white colour.
